What are nursing home quality measures?
A quality measure is a rate: out of all residents who could have had a given outcome, what share did? "Percentage of long-stay residents with a urinary tract infection" and "percentage of short-stay residents who were re-hospitalized within 30 days" are typical examples. Each measure has a precise definition of who counts in the numerator, who counts in the denominator, and who is excluded.
The Centers for Medicare & Medicaid Services (CMS) calculates the measures for every Medicare- or Medicaid-certified nursing home and posts them on Medicare's Care Compare website. A subset is converted into points and then into the quality measure (QM) star rating, one of the three domains in the CMS Five-Star rating. The other two domains are health inspections and staffing.
MDS-based vs claims-based measures: where does the data come from?
Every quality measure starts with one of two data streams. Knowing which one a measure uses tells you how much the nursing home itself controls the underlying data.
| MDS-based measures | Claims-based measures | |
|---|---|---|
| Where the data come from | The Minimum Data Set (MDS 3.0), a standardized clinical assessment the nursing home completes and submits for every resident | Medicare fee-for-service claims (hospital, observation and emergency department bills), plus enrollment data |
| Who records it | Nursing home staff (often an MDS coordinator with input from nursing, therapy and others) | Hospitals and other providers bill Medicare; the nursing home does not enter the data |
| Examples | Falls with major injury, pressure ulcers, catheter use, antipsychotic use, functional decline | Hospitalizations and ED visits per 1,000 long-stay resident days; 30-day rehospitalization; successful return to home and community |
| Risk adjusted? | Some (for example, long-stay pressure ulcers, catheter and walking measures) | All of the claims-based Five-Star measures |
| Main limitation | Depends on accurate self-reported coding | Mostly excludes Medicare Advantage enrollees; reflects only events that produced a claim |
One measure now blends both. Since the January 2026 Care Compare refresh, the long-stay antipsychotic measure supplements MDS data with Medicare and Medicaid claims and Medicare Advantage encounter data, which makes it harder for under-coding to hide medication use.
Long-stay vs short-stay: what is the difference?
CMS splits residents into two groups because their goals differ. Long-stay residents have been in the nursing home for more than 100 days; most are people who live there. Short-stay residents have been there 100 days or fewer; most are recovering after a hospital stay, often under the Medicare skilled nursing facility benefit.
For long-stay residents, the questions are about maintaining function, avoiding harm and avoiding unnecessary drugs. For short-stay residents, the questions are about recovery: did function improve, did the person go home safely, and did they bounce back to the hospital? A home that does well on one list can struggle on the other, so CMS reports a separate long-stay and short-stay QM rating as well as the overall QM rating.
Which quality measures count toward the Five-Star rating in 2026?
According to the September 2026 Five-Star Technical Users' Guide, the QM rating uses 15 measures. Measures marked 150 points are scored by decile; those marked 100 points are scored by quintile.
| Measure | Stay | Source | Max points |
|---|---|---|---|
| Need for help with daily activities has increased | Long | MDS (Section GG) | 150 |
| Ability to walk independently worsened | Long | MDS (Section GG) | 150 |
| Received an antipsychotic medication | Long | MDS + claims/encounter data (since Jan 2026) | 150 |
| Hospitalizations per 1,000 long-stay resident days | Long | Claims | 150 |
| Outpatient ED visits per 1,000 long-stay resident days | Long | Claims | 150 |
| Pressure ulcers (Stage 2–4 or unstageable) | Long | MDS | 100 |
| Catheter inserted and left in the bladder | Long | MDS | 100 |
| Urinary tract infection | Long | MDS | 100 |
| One or more falls with major injury | Long | MDS | 100 |
| At or above expected ability to care for themselves and move around at discharge (discharge function score) | Short | MDS (Section GG) | 150 |
| Re-hospitalized after a nursing home admission | Short | Claims | 150 |
| Had an outpatient ED visit | Short | Claims | 150 |
| Rate of successful return to home and community | Short | Claims | 150 |
| Pressure ulcers/injuries that are new or worsened | Short | MDS | 100 |
| Got an antipsychotic medication for the first time | Short | MDS | 100 |
For definitions, MDS items and improvement ideas, see the measure-by-measure guides to long-stay measures and short-stay measures.
How do quality measures become a star rating?
CMS turns measure values into a rating in four steps:
- Calculate each measure. MDS measures use the four most recent quarters. Claims measures use a full year, except successful return to home and community, which uses two years.
- Assign points. Homes are ranked against the national distribution. On a 150-point measure, the bottom decile gets 15 points and the top decile 150. On a 100-point measure, quintiles earn 20, 40, 60, 80 or 100 points.
- Add up the scores. Long-stay points range from 155 to 1,150. Short-stay points are scaled by 1,150/800 so both lists count equally, and the combined total runs from 299 to 2,300.
- Apply thresholds. Point totals are converted to one to five stars. CMS raises the thresholds roughly every six months by half the average improvement in scores; the latest increase took effect in July 2026.
Measures need at least 20 eligible assessments or stays to be reported. If a home has enough data for most but not all measures, CMS fills the gap with state averages for scoring only and does not publish the imputed values. QM ratings update quarterly, typically in January, April, July and October.
Which measures appear on Care Compare but do not affect the stars?
Care Compare shows more measures than the rating uses. Examples from the MDS 3.0 QM User's Manual v17.0 include long-stay physical restraints, weight loss, depressive symptoms, antianxiety or hypnotic medication use, new or worsened bowel or bladder incontinence, and influenza and pneumococcal vaccination rates. They are still useful. A high restraint rate, for instance, is a red flag that ties directly to federal rules on physical restraints.
What is the SNF Quality Reporting Program?
The Skilled Nursing Facility Quality Reporting Program (SNF QRP) is a pay-for-reporting program. Skilled nursing facilities that do not submit required data face a 2-percentage-point reduction in their annual Medicare payment update. The program's measures focus on the Medicare Part A stay. They include the discharge function score, changes in skin integrity (pressure ulcers/injuries), falls with major injury, discharge to community, potentially preventable readmissions, healthcare-associated infections requiring hospitalization, and transfer of health information.
The FY 2027 SNF payment rule, published on 31 July 2026, removes the two COVID-19 vaccination measures beginning with FY 2028. It also requires facilities to submit MDS data for all covered skilled admissions regardless of payer, starting with admissions on or after 1 October 2029. That should eventually bring Medicare Advantage patients into the data.
What is SNF Value-Based Purchasing?
The SNF Value-Based Purchasing (VBP) Program withholds 2% of each facility's Medicare Part A fee-for-service payments and returns 60% of the withheld pool as incentive payments based on performance. For years it used a single measure, 30-day all-cause readmissions (SNFRM). Congress allowed expansion in 2021, and the program now uses a broader set:
| Measure | Program years |
|---|---|
| SNF 30-Day All-Cause Readmission Measure (SNFRM) | FY 2025–FY 2027 (then replaced) |
| SNF Healthcare-Associated Infections Requiring Hospitalization | FY 2026 onward |
| Total Nurse Staffing (hours per resident day) | FY 2026 onward |
| Total Nursing Staff Turnover | FY 2026 onward |
| Discharge to Community, Post-Acute Care (SNFs) | FY 2027 onward |
| Long-stay hospitalizations per 1,000 resident days | FY 2027 onward |
| Discharge Function Score | FY 2027 onward |
| Falls with major injury (long-stay) | FY 2027 onward |
| SNF Within-Stay Potentially Preventable Readmission (SNF WS PPR) | FY 2028 onward (replaces SNFRM) |
FY 2027 is the first program year scored on eight measures rather than four. Because staffing hours and turnover are now in VBP, PBJ data accuracy affects payment as well as the star rating.
What changed in 2025 and 2026?
- 1January 2025: Section GG measures unfrozenAfter the MDS removed Section G in October 2023, CMS respecified the long-stay ADL and walking measures using Section GG. It replaced the short-stay "improvement in function" measure with the discharge function score, and replaced "high-risk residents with pressure ulcers" with a measure covering all long-stay residents.
- 2July 2025: two inspection cycles, not threeThe health inspection rating began using the two most recent standard surveys (weighted 3/4 and 1/4) instead of three. Claims-based measures gained Section GG risk adjustors. Care Compare also added chain-level performance data.
- 3January 2026: antipsychotic measure respecifiedThe long-stay antipsychotic measure began using claims and encounter data alongside the MDS. In April 2026 CMS corrected the schizophrenia exclusion and reset the cut points.
- 4July 2026: higher QM thresholdsCMS raised the QM rating thresholds again; the point cut-offs for individual measures did not change.
- 5Fall 2026: trophy iconCMS began marking high-performing homes with a trophy icon alongside the star rating (memo QSO-26-14-NH).
How should you read a quality measure?
- Check the direction. For most measures, lower is better (falls, infections, antipsychotics). For the discharge function score and successful return to home and community, higher is better.
- Compare like with like. Care Compare shows state and national averages next to each value. A 2-point gap on a measure that averages 2% matters more than the same gap on one that averages 20%.
- Look for blanks. "Not available" usually means too few residents to report reliably. Small homes often have gaps, which is not in itself a warning sign.
- Remember the lag. Measures cover the most recent four quarters (claims measures a year or more), so a new leadership team's improvements, or a recent decline, may not show yet.
- Ask about outliers. If a home's antipsychotic rate is three times the state average, ask why. If its pressure ulcer rate is very low, ask how it prevents them.
- Combine domains. QMs depend partly on self-reported data. Inspection findings, staffing levels and your own observations help confirm, or contradict, what the numbers suggest.
Families can use our step-by-step guide to choosing a nursing home and our list of questions to ask on a tour to test what the measures say.
How can nursing home teams use their own QM data?
Facilities can see their measures before the public does. The CASPER/iQIES MDS 3.0 Facility-Level and Resident-Level QM reports list which residents triggered each measure, which makes them the natural starting point for a QAPI project. A practical routine:
- Review resident-level QM reports monthly in the QAPI meeting, not just when the Care Compare refresh arrives.
- Check each triggered resident: is the coding accurate, and if it is, what would have prevented the outcome?
- Pick one or two measures for a PDSA cycle, using our QAPI guide and tracking tools.
- Reconcile PBJ hours with payroll each quarter so staffing measures (now also used in VBP) reflect reality.
In this guide
Five-Star RatingsCMS builds a nursing home's overall star rating from its health inspection rating, then adds or subtracts…
Nurse StaffingNursing home staffing is measured in nurse hours per resident day (HPRD), reported to CMS through the…
Health InspectionsEvery Medicare- and Medicaid-certified nursing home gets an unannounced state health inspection about once a…
Long-Stay MeasuresNine long-stay quality measures feed the CMS Five-Star QM rating: seven from the MDS and two from Medicare…
Short-Stay MeasuresSix short-stay measures feed the 2026 Five-Star quality rating, from 30-day rehospitalization to the…
MDS 3.0The Minimum Data Set (MDS 3.0) is the federally required clinical assessment for every resident of a…
Using Care CompareMedicare's Care Compare lets you look up any certified nursing home and compare its star ratings, inspection…
Special Focus FacilitiesA Special Focus Facility (SFF) is a nursing home CMS has singled out for a persistent record of serious…
Frequently asked questions
What are the quality measures for nursing homes?
They are standardized rates CMS calculates from MDS resident assessments and Medicare claims, covering outcomes such as falls with major injury, pressure ulcers, urinary tract infections, antipsychotic use, functional decline, hospitalizations and ED visits. As of 2026, 15 of them (nine long-stay, six short-stay) feed the Five-Star quality measure rating, and more are displayed on Care Compare.
How many quality measures are in the Five-Star rating?
Fifteen, according to CMS's September 2026 Technical Users' Guide: nine for long-stay residents (seven from the MDS, two from claims) and six for short-stay residents (three from the MDS, three from claims). Several other measures, such as restraints and weight loss, are shown on Care Compare but are not used in the rating.
What is the difference between short-stay and long-stay residents?
CMS defines long-stay residents as those who have been in the nursing home for more than 100 days, usually people who live there. Short-stay residents have been there 100 days or fewer and are mostly receiving rehabilitation after a hospital stay. Each group has its own measures and its own QM star rating.
Where does nursing home quality measure data come from?
Most measures come from the Minimum Data Set (MDS), the standardized clinical assessment nursing homes complete and submit for every resident. Hospitalization, emergency department and community discharge measures come from Medicare claims. Since January 2026 the long-stay antipsychotic measure also draws on Medicare and Medicaid claims and Medicare Advantage encounter data.
How often are nursing home quality measures updated?
CMS updates the MDS-based and most claims-based quality measures quarterly, usually with the January, April, July and October Care Compare refreshes. Each MDS measure covers the most recent four quarters of data, and claims measures cover a year or more, so the figures always lag current conditions by several months.
Are nursing home quality measures reliable?
They are useful but imperfect. MDS measures depend on accurate coding by the facility, claims measures mostly exclude Medicare Advantage enrollees, and small homes may lack enough residents for stable rates. CMS audits some coding and adjusts several measures for risk. Use them alongside inspection reports, staffing data and a personal visit.
Get help choosing care or coverage
Talk with a licensed agent about Medicare, Medigap, Medicare Advantage and ways to pay for a nursing home stay. Or call 1-800-MEDIGAP (1-800-633-4427).
Sources
- CMS: Nursing Home Five-Star Quality Rating System Technical Users' Guide (September 2026)
- CMS: MDS 3.0 Quality Measures User's Manual v17.0
- CMS: Nursing home quality measures
- CMS: SNF VBP Program measures
- Federal Register: FY 2027 SNF PPS final rule (31 July 2026)
- CMS: SNF Quality Reporting Program measures and technical information
Independent resource. NHQualityCampaign.org is an independent educational resource. It is not affiliated with, endorsed by or operated by the Centers for Medicare & Medicaid Services (CMS), the U.S. Department of Health and Human Services (HHS), any government agency, or the original Advancing Excellence in America’s Nursing Homes campaign or its sponsors. Historical campaign information is summarized with attribution for educational purposes.
Related reading
Five-Star RatingsCMS builds a nursing home's overall star rating from its health inspection rating, then adds or subtracts…
Long-Stay MeasuresNine long-stay quality measures feed the CMS Five-Star QM rating: seven from the MDS and two from Medicare…
Short-Stay MeasuresSix short-stay measures feed the 2026 Five-Star quality rating, from 30-day rehospitalization to the…
Using Care CompareMedicare's Care Compare lets you look up any certified nursing home and compare its star ratings, inspection…
QAPIQAPI is the data-driven quality program every certified nursing home must run under 42 CFR 483.75.
Choosing a nursing homeTo choose a nursing home, shortlist on Care Compare, read the inspection reports, check staffing, then visit…