What belongs in a nursing home quality improvement toolkit?
A useful toolkit answers four questions for each goal area: what you measure, how you calculate it, how often you look at it, and what you do when it moves. Everything else (binders, color-coded spreadsheets, wall posters) is optional. The table below maps common goal areas to a core metric, the matching template on this site, and the official resource that defines the measure.
| Goal area | Core metric to track | Template on this site | Official reference |
|---|---|---|---|
| Pressure injuries | New facility-acquired stage 2+ pressure injuries per 1,000 resident-days | Pressure injury log | NPIAP staging; MDS Section M; F686 |
| Falls | Falls and falls with major injury per 1,000 resident-days | Falls log, RCA worked example | MDS J1800/J1900; F689 |
| Pain | % of residents with moderate-to-severe pain on the last assessment | Pain assessment tools | MDS Section J; F697 |
| Infections | Infections per 1,000 resident-days by type; antibiotic starts | C. diff line list | CDC NHSN LTCF component; F880, F881 |
| Antipsychotics | % of long-stay residents receiving an antipsychotic | Psychotropic review log | Care Compare long-stay measure; F605 (formerly F758) |
| Hospitalizations | Hospital transfers per 1,000 resident-days; 30-day readmissions | Transfer log | Care Compare claims-based measures |
| Consistent assignment | Distinct nurse aides per resident per month | Assignment grid | Facility-defined (no CMS measure) |
| Staff stability | Annual turnover % and 12-month retention % | Turnover calculator | Care Compare turnover measures (PBJ) |
| Survey readiness | Open plan-of-correction items; expiring licenses | Survey readiness checklist | CMS State Operations Manual Appendix PP |
If you are new to the topic, start with the nursing home quality improvement overview and the QAPI explainer, then come back here for the working tools.
How do you choose which quality measures to track?
Pick measures that matter to your residents, that you can influence within a few months, and that you can count reliably with the staff you have. A common mistake is to inherit a long list of measures from a corporate dashboard and track none of them closely enough to act.
- 1Gather your current picturePull your MDS-based quality measure reports from CASPER/iQIES, your Care Compare profile, your last two survey reports, grievances, incident reports and infection surveillance logs.
- 2Shortlist problems, not projectsList where you are worse than your state or your own past performance, where harm is serious (falls with injury, stage 3 or 4 pressure injuries), and what residents and families complain about most.
- 3Score and pick three to fiveRate each candidate on resident impact, frequency, regulatory risk and how feasible it is to measure. Choose three to five priorities for the year. Everything else stays on a lighter "watch list".
- 4Define each measure in writingWrite the numerator, denominator, data source, inclusions, exclusions, who collects it and when. A measure that two nurses would count differently is not ready.
- 5Pair outcome with process measuresOutcomes (falls with injury) move slowly. Process measures (percent of residents with a post-fall huddle within 24 hours) move fast and tell you whether your changes are actually happening.
- 6Add a balancing measureCheck you are not causing harm elsewhere. Reducing antipsychotics? Watch for increases in falls, behavioral incidents or other psychotropic use.
| Type | What it tells you | Example |
|---|---|---|
| Outcome | Did residents end up better or worse? | Falls with major injury per 1,000 resident-days |
| Process | Are we doing what we planned? | % of new admissions with a Braden score within 24 hours |
| Structure | Do we have the people and systems? | % of nurse aide shifts covered by permanent (non-agency) staff |
| Balancing | Did the fix cause a new problem? | Behavioral incidents per month during a gradual dose reduction project |
| Experience | How do residents and families see it? | % of residents who would recommend the home |
How do you calculate nursing home QI rates correctly?
Raw counts mislead. Ten falls in a 60-bed building and ten falls in a 180-bed building are very different results. Convert counts to rates with a denominator that reflects exposure.
| Rate | Formula | Worked example |
|---|---|---|
| Event rate per 1,000 resident-days | (events in month ÷ resident-days in month) × 1,000 | 9 falls ÷ 3,450 resident-days × 1,000 = 2.6 |
| Point prevalence (%) | (residents with the condition on survey day ÷ residents on census that day) × 100 | 6 residents with stage 2+ pressure injury ÷ 112 = 5.4% |
| Proportion of residents (%) | (residents meeting criterion during period ÷ eligible residents) × 100 | 14 long-stay residents on an antipsychotic ÷ 96 eligible = 14.6% |
| Process compliance (%) | (times the step was done ÷ times it should have been done) × 100 | 31 post-fall huddles ÷ 36 falls = 86% |
| Annual staff turnover (%) | (separations in 12 months ÷ average headcount) × 100 | 58 separations ÷ 124 average CNAs = 46.8% |
How often should a nursing home collect QI data?
Collect data as close to the event as possible and review it on a rhythm that matches how fast the measure can change. Federal rules require the quality assessment and assurance (QAA) committee to meet at least quarterly (42 CFR 483.75), but a quarter is far too slow for spotting a cluster of falls or infections.
| Frequency | What to do | Who |
|---|---|---|
| Every shift / daily | Log events (falls, new skin issues, transfers, new infections, antibiotic starts) in the unit tracking log; discuss in the stand-up huddle | Charge nurse, unit manager |
| Weekly | Skin and weight review, antibiotic time-out, psychotropic review list, assignment grid check | Wound nurse, IP, DON, pharmacist |
| Monthly | Calculate rates, update run charts, review process compliance, refresh the dashboard | QAPI coordinator, IP, MDS coordinator |
| Quarterly (minimum) | QAA committee reviews dashboard, charters or closes PIPs, checks plan-of-correction monitoring | Administrator, DON, medical director, IP, others |
| Annually and as needed | Update facility assessment, reset priorities and targets, review QAPI plan | Leadership team |
What should a nursing home QI dashboard include?
A good dashboard fits on one page and answers "Are we getting better, worse, or staying the same?" for each priority. Show a run chart, the current value, the target and a one-line status. Leave raw logs in the background.
| Measure | Last 3 months | Median (12 mo) | Target | Status |
|---|---|---|---|---|
| Falls with major injury / 1,000 resident-days | 0.6, 0.3, 0.0 | 0.5 | ≤ 0.3 | Watch: 3 low months, not yet a shift |
| New stage 2+ pressure injuries / 1,000 resident-days | 0.9, 1.2, 1.4 | 0.8 | ≤ 0.5 | Rising: chartered PIP |
| Long-stay antipsychotic use (%) | 15.1, 14.6, 13.9 | 15.8 | ≤ 12 | Improving |
| Hospital transfers / 1,000 resident-days | 1.8, 2.4, 2.1 | 2.0 | ≤ 1.6 | Stable |
| CNA 12-month turnover (%) | 49, 47, 46 | 51 | ≤ 40 | Improving |
- Use run charts, not just bar charts. A run chart plots the measure over time against its median. Common rules: six or more consecutive points above or below the median is a shift; five or more consecutive points all rising or all falling is a trend.
- Annotate changes. Mark the month you started hourly rounding or a new skin protocol so the team can see whether the line moved afterward.
- Keep definitions stable. If you change how a measure is counted, start a new line on the chart.
- Show unit-level data. A facility average can hide one unit driving the problem.
How do you use tracking data in QAPI?
Tracking data only matters if it drives decisions. QAPI (42 CFR 483.75; F865 to F868 in Appendix PP) expects you to collect data, identify priorities, run performance improvement projects (PIPs) and show that corrections hold. A practical loop looks like this:
- 1DetectA run chart signal, a sentinel event, a survey finding or a complaint flags a problem.
- 2UnderstandUse a root cause analysis (5 Whys, fishbone) to find system causes instead of blaming individuals.
- 3Charter a PIPName the team, the aim (what, how much, by when), the measures and the scope. Our implementation guides include a charter outline for each goal area.
- 4Test changes with PDSA cyclesTry one change on one unit or one shift, measure, learn, adjust. Small fast tests beat big launches.
- 5Spread and sustainWrite the change into policy and training, keep the measure on the dashboard and audit monthly until it holds for at least three to six months.
Policies and procedures are where improvements either stick or quietly fade. A versioned SOP builder for QAPI, falls and infection-control policies makes it easier to show surveyors which version staff were trained on and when it changed.
What happened to the old Advancing Excellence tracking tools?
Which free official tools should every QAPI team bookmark?
- CMS QAPI resources: QAPI at a Glance, the QAPI plan how-to guide, PIP charter worksheet, PDSA worksheet, Five Whys and fishbone tools, and the root cause analysis guide.
- CDC NHSN Long-term Care Facility Component: protocols, forms and the LabID event calculator for C. difficile and MDRO surveillance.
- CDC Core Elements of Antibiotic Stewardship for Nursing Homes: seven elements, including tracking at least one process and one outcome measure.
- AHRQ On-Time program: pressure ulcer prevention and healing toolkits built around weekly electronic reports.
- NPIAP: current pressure injury staging definitions and educational posters.
- INTERACT: tools for managing acute change in condition and reducing avoidable transfers, distributed by Pathway Health (check its licensing terms).
- American Geriatrics Society: persistent pain guidance and the AGS Beers Criteria for potentially inappropriate medications.
- IHI: run chart tool and PDSA worksheets.
For how these measures show up publicly, see nursing home quality measures explained and the long-stay measures guide.
In this guide
Tracking tool templatesA good nursing home tracking tool is a one-row-per-event log with fixed columns, a monthly rate formula and a…
Implementation guidesEvery nursing home improvement project follows one arc: form a team, measure a baseline, set a target, test…
C. diff trackingTrack C. diff in a nursing home by logging each positive stool test, classifying it with CDC NHSN LabID rules…
Survey readiness checklistSurvey readiness means having entrance-conference documents ready, running mock surveys against the…
Staff turnover calculatorAnnual staff turnover is the number of employees who left in 12 months divided by your average headcount…
Pain assessment toolsAsk residents who can self-report to rate pain on a numeric or verbal scale; for advanced dementia, use an…
Root cause analysisRoot cause analysis (RCA) is a team method for finding the system and process failures behind an adverse…
Frequently asked questions
What tools are used for quality improvement in nursing homes?
Most nursing homes rely on tracking logs, run charts, a one-page dashboard, root cause analysis tools (5 Whys and fishbone diagrams), PIP charters and PDSA worksheets. CMS publishes free QAPI worksheets, CDC's NHSN supports infection surveillance, and AHRQ offers pressure ulcer and safety-culture toolkits. The right set is the smallest one your team will actually use every month.
How many quality measures should a nursing home track?
Track three to five priority measures closely, each paired with a process measure and reviewed monthly on a run chart. Keep other measures on a lighter watch list that you check quarterly. Trying to actively manage twenty measures usually means none of them gets the attention needed to change practice.
How do you calculate a rate per 1,000 resident-days?
Divide the number of events in the period by the total resident-days in the same period, then multiply by 1,000. Resident-days are the sum of each day's midnight census. For example, 9 falls in a month with 3,450 resident-days equals a rate of about 2.6 falls per 1,000 resident-days.
How often does the QAA committee have to meet?
Federal rules at 42 CFR 483.75 require the quality assessment and assurance committee to meet at least quarterly. Many homes meet monthly because quarterly reviews are too slow to catch clusters of falls, infections or pressure injuries. Whatever the schedule, the committee should review data, act on problems and document follow-up.
What is the difference between QA and QAPI?
Quality assurance (QA) checks whether standards are met, usually after the fact. QAPI combines QA with performance improvement: proactively studying processes, running improvement projects and sustaining gains. CMS requires nursing homes to have a written QAPI program covering all services, data systems, performance improvement projects and systematic analysis of problems.
Can I still download the Advancing Excellence tracking tools?
This site does not host or redistribute the original campaign's files. We are an independent educational resource. You can use the original templates on this site, which cover the same goal areas, and current official tools from CMS, CDC NHSN, AHRQ, NPIAP and the American Geriatrics Society.
Sources
- CMS QAPI resources for nursing homes
- 42 CFR 483.75 Quality assurance and performance improvement (eCFR)
- CDC NHSN Long-term Care Facility Component: MDRO and CDI LabID events
- CDC Core Elements of Antibiotic Stewardship for Nursing Homes
- AHRQ Safety Program for Nursing Homes: On-Time Pressure Ulcer Prevention
- IHI Run Chart Tool
Independent resource. NHQualityCampaign.org is an independent educational resource. It is not affiliated with, endorsed by or operated by the Centers for Medicare & Medicaid Services (CMS), the U.S. Department of Health and Human Services (HHS), any government agency, or the original Advancing Excellence in America’s Nursing Homes campaign or its sponsors. Historical campaign information is summarized with attribution for educational purposes.
Related reading
Tracking tool templatesA good nursing home tracking tool is a one-row-per-event log with fixed columns, a monthly rate formula and a…
Implementation guidesEvery nursing home improvement project follows one arc: form a team, measure a baseline, set a target, test…
Root cause analysisRoot cause analysis (RCA) is a team method for finding the system and process failures behind an adverse…
QAPIQAPI is the data-driven quality program every certified nursing home must run under 42 CFR 483.75.
Quality MeasuresNursing home quality measures are standard rates, built from MDS assessments and Medicare claims, that track…
C. diff trackingTrack C. diff in a nursing home by logging each positive stool test, classifying it with CDC NHSN LabID rules…