Skip to content
NHQualityCampaign.orgIndependent nursing home quality resource
Quality ImprovementFor professionals

QAPI in Nursing Homes: Five Elements, F-Tags and PIPs

QAPI is the data-driven quality program every certified nursing home must run under 42 CFR 483.75. This guide covers the five elements, F865, F867 and F868, the QAA committee, performance improvement projects, PDSA, root cause analysis and dashboards.

Updated 6 min readHow we research
Two people reviewing reports and charts on laptops
Photo: Scott Graham (Unsplash License). Credits

What is QAPI?

Quality Assurance and Performance Improvement (QAPI) is the quality management system nursing homes must maintain under 42 CFR 483.75, a requirement that grew out of Section 6102(c) of the Affordable Care Act. Quality assurance checks that care meets standards; performance improvement studies processes to find and fix the root causes of problems. Since November 28, 2017, nursing homes have been required to present a written QAPI plan to surveyors.

The regulation calls for an "effective, comprehensive, data-driven" program focused on outcomes of care and quality of life, covering all systems of care and management, including clinical care, quality of life and resident choice.

What are the five elements of QAPI?

CMS's five elements of QAPI
ElementWhat it means in practice
1. Design and scopeA written plan covering every department and service, clinical and non-clinical, balancing safety, quality, resident choice and autonomy.
2. Governance and leadershipThe governing body and leaders provide resources, set priorities, make it safe to report problems and hold the program accountable.
3. Feedback, data systems and monitoringSystems to gather feedback from residents, families and staff; track performance indicators and adverse events; benchmark against targets.
4. Performance improvement projects (PIPs)Focused, structured projects on areas needing improvement, chosen from data.
5. Systematic analysis and systemic actionRoot cause analysis and systems thinking so fixes address processes, not just individuals; monitoring that changes are sustained.

Which F-tags cover QAPI?

  • F865: QAPI program and plan, disclosure of the plan to surveyors, and the good-faith-attempt protection for identified problems.
  • F867: QAPI/QAA improvement activities, including feedback, data collection and monitoring, adverse event tracking, priorities and PIPs. (Data and monitoring requirements once listed under F866 are now surveyed here.)
  • F868: QAA committee composition, meeting frequency and reporting.

CMS's 2025 surveyor guidance update (QSO-25-14-NH, effective April 28, 2025) added expectations around health equity: considering sub-population outcomes and factors such as race, socioeconomic status and language when collecting data, investigating adverse events and setting QAPI priorities. It also brought medical director interviews into the QAPI survey pathway.

Who must sit on the QAA committee?

  • The director of nursing services.
  • The medical director or designee.
  • At least three other staff, one of whom must be the administrator, owner, a board member or another individual in a leadership role.
  • The infection preventionist.

The committee must meet at least quarterly and as needed, report to the governing body, coordinate and evaluate QAPI activities, and develop and implement plans of action to correct identified quality deficiencies. Strong committees also invite a pharmacist, therapy, dietary, social services, frontline nursing assistants and a resident or family representative.

How do you run a performance improvement project?

A PIP is a concentrated effort on a specific problem in one area or across the facility. 42 CFR 483.75(e)(3) requires facilities to conduct distinct PIPs matched to their scope and complexity, and at least annually a project focused on high-risk or problem-prone areas identified through data. Good topics come from your own data: quality measures, falls logs, infection surveillance, grievances, survey findings, hospital transfers and staff turnover.

  1. 1
    Charter the project
    Write a one-page charter: problem statement, aim (specific, measurable, time-bound), scope, team, sponsor and measures.
  2. 2
    Understand the process
    Map the current process, gather frontline input and use a root cause analysis (fishbone, five whys) to find causes.
  3. 3
    Plan a small test (PDSA: Plan)
    Pick one change idea, predict what will happen, and decide who, where, when and what you will measure.
  4. 4
    Do
    Run the test on one unit, one shift or a handful of residents. Note problems and surprises.
  5. 5
    Study
    Compare results with your prediction. Plot data over time on a run chart.
  6. 6
    Act
    Adopt, adapt or abandon. Run the next cycle, then scale what works and hard-wire it into policy and training.
  7. 7
    Sustain
    Keep monitoring the measure monthly for at least several months after the project closes.

Keep policies and procedures that come out of PIPs version-controlled so staff always see the current protocol. A free SOP builder for versioned policies is one way to manage infection control, QAPI and falls protocols without a binder.

What belongs on a QAPI dashboard?

Example QAPI dashboard indicators
DomainExample indicators
Clinical outcomesFalls and falls with major injury, new pressure injuries, UTIs, weight loss, antipsychotic use, hospital transfers and readmissions
Infection preventionInfection rates by type, antibiotic starts and days of therapy, C. diff cases, immunization rates
WorkforceTurnover, agency use, vacancies, consistent assignment rate
Resident experienceGrievances, satisfaction, resident council concerns
Survey and complianceDeficiencies, plan-of-correction status, credential expirations

Show each indicator over time against a target, not as a single month's number. Free templates live in our tracking tools, C. diff tracker and staff turnover calculator. Use the survey readiness checklist to check your QAPI documentation before survey.

Clinical PIP topics: falls, pressure injuries, infection prevention, hospitalizations and antipsychotic reduction. Return to the quality improvement hub or the QI toolkit.

Frequently asked questions

What are the five elements of QAPI?

CMS describes five elements: design and scope; governance and leadership; feedback, data systems and monitoring; performance improvement projects; and systematic analysis and systemic action. Together they describe a program that covers every service, is resourced by leadership, runs on data, improves through structured projects, and fixes root causes in systems rather than blaming individuals.

Who must be on the QAA committee in a nursing home?

Under 42 CFR 483.75(g), the committee must include the director of nursing, the medical director or designee, at least three other staff members including one in a leadership role such as the administrator, owner or a board member, and the infection preventionist. The committee must meet at least quarterly and as needed.

How many PIPs does a nursing home need?

The regulation does not set a fixed number. Facilities must run distinct performance improvement projects that reflect the scope and complexity of their services and resources, and at least once a year must conduct a project focused on a high-risk or problem-prone area identified through data analysis. Many facilities run several at once.

What is F865?

F865 is the federal survey tag for the QAPI program and plan. It covers maintaining a comprehensive, data-driven QAPI program, presenting the written QAPI plan to surveyors, governing body accountability, and the good-faith-attempt provision that protects facilities that identify and work on quality problems.

What is a PDSA cycle?

PDSA stands for Plan, Do, Study, Act. It is a method for testing a change on a small scale: plan a test and predict the result, carry it out, study what happened against the prediction, then act by adopting, adapting or abandoning the change. Repeated rapid cycles let teams improve without disrupting the whole facility.

Is QAPI the same as QAA?

No. QAA (quality assessment and assurance) refers to the committee and its oversight role, which has existed for decades. QAPI is the broader program that adds continuous performance improvement, data systems and improvement projects. The QAA committee oversees and coordinates the QAPI program and reports to the governing body.

Sources

  1. 42 CFR 483.75 Quality assurance and performance improvement
  2. CMS: QAPI description and background
  3. CMS: QAPI resources
  4. CMS QSO-25-14-NH: Revised long-term care surveyor guidance (2025)
  5. IHI: Plan-Do-Study-Act worksheet

Independent resource. NHQualityCampaign.org is an independent educational resource. It is not affiliated with, endorsed by or operated by the Centers for Medicare & Medicaid Services (CMS), the U.S. Department of Health and Human Services (HHS), any government agency, or the original Advancing Excellence in America’s Nursing Homes campaign or its sponsors. Historical campaign information is summarized with attribution for educational purposes.